Stainless Steel Electrode
ER410 is used to weld types 403, 405, 410, and 416 grades of stainless. It is also commonly used for welding overlay on carbon steels to resist corrosion, erosion, or abrasion. Because this is an air hardening type of material the joint to be welded should be preheated to 350oF.
AWS Specification : AWS A5.9/A5.9M:2006
AWS Classification | ER410 |
Welding Current | DCEP |
Typical wire chemistry | ||||||||
C | Cr | Ni | Mo | Mn | Si | P | S | Cu |
0.12 | 11.5 - 13.5 | 0.6 | 0.75 | 0.6 | 0.5 | 0.03 | 0.03 | 0.75 |
Typical Mechanical Properties (As Welded post heat treatment between 1350o and 1400oF for one hour) | |
Yield Strength, ksi | 78 |
Tensile Strength, ksi | 89 |
Elongation%, min | 24 |
Welding Positions | F,V,OH,H |
Available Diameters MIG with Operating Range in Amps | |
.030" | 50 - 100 |
.035" | 160 - 210 |
.045" | 180 - 250 |
Available Diameters TIG with Operating Range in Amps | |
.035" | 60 - 90 |
.045" | 80 - 110 |
1/16" | 90 - 130 |
3/32" | 120 - 175 |
1/8" | 150 - 220 |
5/32" | 170 - 350 |